Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Avaya 3605 et passer le test à la première fois.
Choisissez le Pass4Test, choisissez le succès de test Avaya 3605. Bonne chance à vous.
3605 est un test de Avaya Certification, donc réussir 3605 est le premier pas à mettre le pied sur la Certifiction Avaya. Ça peut expliquer certiainement pourquoi le test Avaya 3605 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test 3605. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Avaya 3605. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
C'est pas facile à passer le test Certification Avaya 3605, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Avaya 3605 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Avaya 3605, vous allez passer le test Avaya 3605 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.
Le produit de Pass4Test peut assurer les candidats à réussir le test Avaya 3605 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.
Code d'Examen: 3605
Nom d'Examen: Avaya (Avaya Ethernet Routing Switch Implementation and Maintenance Exam)
Questions et réponses: 173 Q&As
Vous pouvez télécharger tout d'abord une partie de Q&A Certification Avaya 3605 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Avaya 3605. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
3605 Démo gratuit à télécharger: http://www.pass4test.fr/3605.html
NO.1 The SNMP counters check for authorization failures and other types error conditions. Which of
these SNMP error conditions is displayed in Enterprise Device Manager?
A. PCAP packet capture counters
B. In Bad Community Names counters
C. Fan Failure packet counters
D. Power Supply Failure packet counters
Answer: D
certification Avaya certification 3605 3605
NO.2 What does the trace level 9 3 command accomplish?
A. It captures BGP events at a terse level.
B. It captures packets copied to the CPU at a verbose level.
C. It shows CPU utilization.
D. It captures RCC IP events at verbose level.
Answer: B
Avaya 3605 3605 examen certification 3605 3605 examen
NO.3 The attempt to manage an Ethernet Routing Switch (ERS) 8000 using a Virtual Route
Redundancy Protocol (VRRP) address was not successful. What is causing this problem?
A. The virtual router identifier is 0.
B. The data center interface is set as a critical IP interface.
C. A real IP address is required for management access not a VRRP address.
D. The virtual router identifier is configured for the VRRP IP address owner.
Answer: C
Avaya examen 3605 3605 3605 examen 3605 3605
NO.4 In a multicast campus, when should an ERS 8600 PIM interface be configured to run in passive
mode?
A. When the interface is used as an edge interface and is aggregating traffic.
B. When the interface is used as a core interface and needs to limit PIM messages to reduce the
system load.
C. When there are no unicast routing paths.
D. When more than one unicast routing protocol is in use.
Answer: A
Avaya 3605 3605 3605 examen
NO.5 Traceroute allows a route to be traced to a network using an Ethernet Routing Switch (ERS)
8600 CLI command. How could you use it to limit the number of hops the traceroute reports?
A. Configure the -P (base UDP port) to the number of maximum number hops.
B. Configure the -q (number of probes per TTL) to the number maximum number of hops.
C. Configure the -m (maximum TTL value) to the number of maximum number of hops.
D. Configure the -w (wait time per probe) to the number of maximum number of hops.
Answer: C
Avaya 3605 3605 certification 3605 3605 examen
NO.6 The Ethernet Routing Switch (ERS) 8600 switch includes a means to fine tune the memory
resources by allowing the record allocations to be allowed. An ERS 8600 running Release 5.0 needs
to be configured to be optimized for multicast traffic. Which command alters the ERS 8600 to
increases the default allocation of Multicast by 50 percent?
A. Config sys set record record reserve MGID + 50
B. Config sys set max-vlan-resource-reservation 4096
C. Config sys set show sys mgid usage
D. Config sys set multicast-resource-reservation 3073
Answer: D
Avaya examen 3605 3605 3605 3605
NO.7 What does Ping snoop identify?
A. The path that IP traffic takes over an MLT or SMLT
B. The rate of IP traffic flow
C. Which port filter is best to use on MLT networks
D. Rate limiting for ICMP traffic
Answer: A
Avaya examen 3605 examen 3605 examen certification 3605
NO.8 When configuring a new Ethernet Routing Switch (ERS) 8000 using the default interface, the
attempt to load an ACLI configuration fails because the default interface is the CLI. How is the ACLI
interface obtained?
A. Change the interface type in the config.cfg file.
B. Change the ACLI boot flag and save the boot configuration file.
C. Exit the CLI and choose ACLI at the interface manager prompt.
D. Use the abort command and enter 'no' at the default interface.
Answer: C
Avaya 3605 examen 3605 3605 3605
NO.9 A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in the
existing Ethernet Routing Switch (ERS) 8600-based core. The technician has to configure VRF on the
ERS 8600. Which statement represents the order for configuring a new VRF?
A. Creating a new VLAN, add an IP address to the VLAN, create the VRF in the VLAN configuration.
B. Create VRF, change context to the new VRF, add an IP address, create a new VLAN, and move the
VLAN to the new VRF.
C. Create a VRF, change context to the new VRF, create a new VLAN, add an IP address to the VLAN.
D. Create a VRF, create a new VLAN, move the VLAN to the new VRF, change context to the new VRF,
and add an IP Address.
Answer: D
Avaya certification 3605 certification 3605
NO.10 By default the ERS 8000 is configured for warm standby. After installation of a new ERS
solution with dual CPUs, which three actions need to be Perform on the ERS configuration to ensure
high availability mode is enabled and will function correctly? (Choose three)
A. Set the high availability CPU boot flag to true.
B. Set the warm standby CPU hoot flag to false. C. Set the save to standby CPU boot flag to true.
D. Save the boot.cfg conflg file and reset the switch to activate the changes.
E. Install the high availability license file.
Answer: A,D,E
Avaya 3605 3605 examen 3605
Pass4Test est un seul site de provider le guide d'étude Avaya 3605 de qualité. Peut-être que vous voyiez aussi les Q&A Avaya 3605 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
没有评论:
发表评论