Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Juniper JN0-314 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Juniper JN0-314 sans aucune doute si vous choisissez le Pass4Test.
Code d'Examen: JN0-314
Nom d'Examen: Juniper (Junos Pulse Access Control, Specialist (JNCIS-AC))
Questions et réponses: 115 Q&As
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Juniper JN0-314.
La population de la Certification Juniper JN0-314 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
Est-ce que vous vous souciez encore de réussir le test Juniper JN0-314? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
Vous Juniper JN0-314 pouvez télécharger le démo Juniper JN0-314 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.
Pass4Test peut offrir la facilité aux candidats qui préparent le test Juniper JN0-314. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Juniper JN0-314 selon le résumé de test réel Juniper JN0-314. Vous pouvez réussir le test à la première fois sans aucune doute.
JN0-314 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-314.html
NO.1 Click the Exhibit button.
What is the cause of the error shown in the exhibit?
A. A RADIUS request is being received from a device that is not configured on the RADIUS Client page.
B. A user entered an incorrect password during RADIUS authentication.
C. A RADIUS proxy attempt failed to reach the configured proxy server.
D. The RADIUS shared secret is incorrect.
Answer: A
Juniper examen JN0-314 JN0-314
NO.2 A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access
Control Service. When configuring the switch on the Junos Pulse Access Control Service, the customer
does not find a make/model entry for it.
Which two actions should the customer take to make the switch work with the Junos Pulse Access Control
Service? (Choose two.)
A. Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.
B. Add the switch to the Junos Pulse Access Control Service using the "Any" make/model.
C. Add the switch as a firewall enforcer.
D. Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the
make/model.
Answer: A,D
certification Juniper JN0-314 JN0-314 certification JN0-314 JN0-314
NO.3 You have a firewall enforcer protecting resources in a data center. A user is experiencing difficulty
connecting to a protected resource.
Which two elements must exist so the user can access the resource? (Choose two.)
A. Resource access policy on the MAG Series device
B. IPsec routing policy on the MAG Series device
C. General traffic policy blocking access through the firewall enforcer
D. Auth table entry on the firewall enforcer
Answer: A,D
Juniper certification JN0-314 JN0-314 examen JN0-314
NO.4 You want to ensure that users who access the company's protected resources present a client
certificate before they are allowed to sign in.
What should you configure?
A. A certificate authentication policy that allows all users and remembers certificate information while the
user is signed in.
B. A certificate authentication policy that only allows users with a client-side certificate signed by a trusted
client CA to sign in.
C. A certificate role restriction that allows all users and remembers certificate information while the user is
signed in.
D. A certificate role restriction that only allows users with a client-side certificate signed by a trusted client
CA to sign in.
Answer: B
Juniper JN0-314 examen JN0-314 JN0-314 JN0-314
NO.5 What are two ways to access the Junos Pulse Access Control Service? (Choose two.)
A. admin GUI
B. Telnet
C. SSH
D. console
Answer: B,C
Juniper JN0-314 JN0-314 JN0-314
NO.6 What is a type of firewall enforcer supported by the Junos Pulse Access Control Service.?
A. Checkpoint firewall
B. SRX Series device
C. DP sensor
D. MX Series device
Answer: A
Juniper JN0-314 certification JN0-314 certification JN0-314
NO.7 A customer is trying to decide which 802.1X inner protocol to use on their network. The customer
requires that no passwords be sent across the network in plain text, that the protocol be supported by the
Windows native supplicant, and that the protocol supports password changes at Layer 2.
Which protocol would meet the customer's needs?
A. EAP-TLS
B. EAP-MD5
C. PAP
D. EAP-MSCHAPv2
Answer: D
Juniper JN0-314 JN0-314 certification JN0-314 JN0-314 examen JN0-314
NO.8 A customer wants to create a custom Junos Pulse configuration. Which two are required? (Choose two)
A. Connection set
B. Configuration set
C. Custom installer
D. Component set
Answer: A,D
certification Juniper JN0-314 JN0-314
NO.9 You are configuring an active/passive cluster of SRX Series devices as the firewall enforcer on a MAG
Series device. Which statement is true?
A. Multiple Infranet Enforcer instances are created with a single serial number of an SRX Series device
defined in each configuration.
B. A single Infranet Enforcer instance is created with both serial numbers of the clustered SRX Series
devices defined in the configuration.
C. Multiple Infranet Enforcer instances are created with a single IP address of an SRX Series device
defined in each configuration.
D. A single Infranet Enforcer instance is created with the VIP of the clustered SRX Series device defined
in the configuration.
Answer: B
Juniper JN0-314 JN0-314 JN0-314 examen
NO.10 A user's Junos Pulse client uses 802.1X to access a wired network and is failing to authenticate. You
run a packet capture from the user's PC and notice that immediately after the client machine sends an
EAPoL-start packet, an EAP-failure packet is returned. You review the RADIUS troubleshooting logs on
the MAG Series device and do not see any authentication attempts from the user. Other users on the
same Ethernet switch are successfully authenticating.
Which device is sending the EAP-failure packet to the workstation?
A. The RADIUS server
B. The EAPoL server
C. The workstation's network adapter
D. The Ethernet switch
Answer: D
Juniper JN0-314 examen JN0-314
NO.11 You are configuring an IPsec routing policy that will be used with a ScreenOS firewall enforcer. What
must you also configure?
A. Source IP policies on the ScreenOS device
B. ScreenOS IPsec policies on the Junos Pulse Access Control Service
C. VPN NAT traversal on the ScreenOS device
D. Source interface policies on the Junos Pulse Access Control Service
Answer: B
certification Juniper JN0-314 JN0-314 examen JN0-314 JN0-314 certification JN0-314
NO.12 You navigate to "UAC" > "Infranet Enforcer" > "Auth Table Mapping" in the admin GUI. You see one
policy, which is the unmodified, original default policy.
Which statement is true?
A. Dynamic auth table mapping is not enabled.
B. A successful authentication attempt will result in a new authentication table entry, which will be
delivered only to the Junos enforcer protecting the network from which the user has authenticated.
C. To create a static auth table mapping, you must delete the default policy.
D. The default policy applies only to the factory-default role User.
Answer: A
Juniper JN0-314 examen JN0-314 JN0-314 examen
NO.13 Which three settings are accessible from the serial console menu on a MAG Series device? (Choose
three.)
A. The ping command
B. Factory default reset
C. Personality image
D. License imports
E. Admin login credentials
Answer: A,B,E
certification Juniper JN0-314 JN0-314 JN0-314 JN0-314
NO.14 What is the function of Host Checker?
A. To allow clientless access to the network
B. To restrict access to protected resources on the network
C. To scan an endpointfor compliance with security policies
D. To push a firewall policy to the endpoint's local firewall application
Answer: B
Juniper examen JN0-314 certification JN0-314
NO.15 You have a Junos Pulse Secure Access Service acting as an IF-MAP client, configured to federate all
user roles to a Junos Pulse Access Control Service acting as an IF-MAP Federation server. A remote user
using Junos Pulse logs in to the Junos Pulse Secure Access Service; the Junos Pulse Secure Access
Service provisions a remote access session for that user.
What happens next?
A. The Junos Pulse Secure Access Service redirects the user to the Junos Pulse Secure Access Service
for authentication
B. The Junos Pulse Access Control Service provisions enforcement points to enable resource access for
that user.
C. The Junos Pulse Secure Access Service publishes user session and role information to the IFMAP
Federation server,
D. The Junos Pulse Secure Access Service provisions enforcement points to enable resource access for
that user.
Answer: C
Juniper examen JN0-314 examen JN0-314 JN0-314 examen certification JN0-314
Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Juniper JN0-314 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Juniper JN0-314 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.
没有评论:
发表评论