Le test Certificat Microsoft 70-545 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Microsoft 70-545. Vous allez prendre toutes essences du test Microsoft 70-545 dans une courte terme.
Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Microsoft 70-545. La ressourece providée par Pass4Test peut juste s'accorder votre demande.
Bien qu'il ne soit pas facile à réussir le test Microsoft 70-545, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Microsoft 70-545, mais encore à vous aider d'économiser votre temps.
Avec l'aide du Pass4Test, vous allez passer le test de Certification Microsoft 70-545 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Microsoft 70-545, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.
Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Microsoft 70-545 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Microsoft 70-545.
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Microsoft 70-545. Votre argent sera tout rendu si vous échouez le test.
Code d'Examen: 70-545
Nom d'Examen: Microsoft (TS: Microsoft Visio 2007, Application)
Questions et réponses: 86 Q&As
70-545 Démo gratuit à télécharger: http://www.pass4test.fr/70-545.html
NO.1 You are developing an Office Visio 2007 Shared Add-in. You create an object named objShape that references a new shape. You need to modify the add-in to identify the shape if the shape is moved to a different page. Which property of objShape should you reference?
A. ID
B. Name
C. NameID
D. UniqueID(visGetOrMakeGUID)
Answer: D
Microsoft 70-545 examen 70-545 70-545
NO.2 You have a Windows Forms application that contains an embedded Visio Drawing Control.
You have an Office Visio 2007 drawing saved as C:\Template.vsd. You need to configure the
application to load and display the drawing as a template by using the Visio Drawing Control.
Which code should you add to the application?
A. Me.axDrawingControl1. Document.Application.Documents.Open( "C:\Template.VSD ")
B. Me.axDrawingControl1.Window.Application.Documents.Open( " C:\Template.VSD " )
C. Me.axDrawingControl1.Src = " C:\Template.VSD "
D. Dim openDockedFlag As Short = CShort(Visio.VisOpenSaveArgs.visOpenDocked) Me.axDrawingControl1.Window.Application.Documents. OpenEx("C:\Template.VSD",openDockedFlag)
Answer: C
Microsoft 70-545 examen 70-545 examen certification 70-545 certification 70-545 70-545 examen
NO.3 You create a custom template and several custom stencils. You need the stencils to open automatically when a new file is created from the template. What should you do?
A. Deploy the stencils to the My Shapes folder.
B. Deploy the stencils to the same folder as the template.
C. Dock the stencils in the template workspace, and then save the template.
D. Modify the Office Visio 2007 application settings to contain the path to the stencils.
Answer: C
Microsoft certification 70-545 70-545 70-545 70-545
NO.4 You are developing an Office Visio 2007 Shared Add-in. You need to modify the add-in to perform an action after the Visio 2007 application flushes its events queue. What should you do?
A. ListenforAppDeactivated.
B. Listen for RunModeEntered.
C. Listen for MustFlushScopeBeginning.
D. Queue a MarkerEvent and then listen for a MarkerEvent.
Answer: D
certification Microsoft 70-545 certification 70-545 certification 70-545 70-545
NO.5 You are developing an Office Visio 2007 Shared Add-in. You need to prevent shape deletions by using custom logic. What should you do?
A. Configure the add-in to listen to the QueryCancelPageDelete event of the Visio 2007 application.
B. Configure the add-in to listen to the QueryCancelSelectionDelete event of the Visio 2007 application.
C. Configure the add-in to listen to the BeforeShapeDelete event of the Visio 2007 application.
D. Configure the add-in to listen to the BeforeSelectionDelete event of the Visio 2007 application.
Answer: B
Microsoft examen 70-545 70-545 examen 70-545 examen certification 70-545
NO.6 You are creating an application that will be used to connect two two-dimensional (2-D) shapes by using a Dynamic Connector shape. In your application, you create an object named myVisioApp that references the Visio Application object. You need to add code to your application to connect the 2-D shapes. What code should you add?
A. myVisioApp.Active P age.Shapes(1). Cells(PinX). GlueTo( myVisioApp.Active P age.Shapes(2) .Cells(PinX) )
B. myVisioApp.Active P age. Shapes(1).Cells(BeginX).GlueTo myVisioApp.ActivePage.Shapes(2).Cells(Connections.X1)
C. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes(2), visAutoConnectDirNone)
D. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes( 1 ) , visAutoConnectDirRight )
Answer: C
Microsoft 70-545 70-545 certification 70-545 70-545 examen
NO.7 You are developing an Office Visio 2007 SharedAdd-in.
You construct an event sink class that listens to events from the Visio 2007 Application,
Document, Page, and Shape objects. The VisEventProc function has the following signature:
Public Function VisEventProc(
ByVal eventCodeAs Short,
ByVal sourceAs Object,
ByVal eventIdAs Integer,
ByVal eventSequenceNumberAs Integer,
ByVal subjectAs Object,
ByVal moreInformationAs Object)As Object
You need to construct a switch to identify the object that raised the event.
Which parameter should you use?
A. eventCode
B. moreInformation
C. source
D. subject
Answer: C
certification Microsoft certification 70-545 70-545 70-545
NO.8 You are developing an Office Visio 2007 Shared Add-in. You create three objects named objMaster, objPage, and objWindow. The object objMaster references a local copy of the master. The object objPage references the current page. The object objWindow references the active window. You need to create several shape instances of the master on the current page at specific coordinates in the active window. Which method should you use?
A. objPage.Drop()
B. objPage.DropMany()
C. objWindow.CreateSelection()
D. objMaster.Shapes.Item(1).Copy() objPage.Paste()
Answer: B
certification Microsoft 70-545 examen certification 70-545
NO.9 You plan to create an Office Visio 2007 application. You need to prevent Visio 2007 from failing in the event that there is a fault in the application. What are three possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose three.)
A. CreateaVBAsolution.
B. CreateaVSLsolution.
C. Create an EXE add-on solution.
D. CreateaSharedAdd-insolution,andthenusetheCOMShimWizardtocreateaDLL.
E. Create a Shared Add-in solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition.
Answer: CDE
certification Microsoft 70-545 certification 70-545 70-545 70-545
NO.10 You need to develop an Office Visio 2007 solution for 1,000 computers that run Visio 2007.
The solution must meet the following requirements:
The solution must not require the installation of additional components, tools, or DLLs. Users
must be able to customize the solution without installing additional development tools.
What should you develop?
A. A template and a Visio Solutions Library (VSL)
B. A custom stencil that uses ShapeSheet programming
C. A Windows Forms application that contains the Visio Drawing Control
D. A solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition
Answer: B
Microsoft examen 70-545 70-545 certification 70-545
Pass4Test est un catalyseur de votre succès de test Microsoft 70-545. En visant la Certification de Microsoft, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Microsoft 70-545, la Q&A Microsoft 70-545 est un bon choix pour vous.
没有评论:
发表评论