Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Citrix 1Y0-A28, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Citrix 1Y0-A28 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Citrix 1Y0-A28 sans aucune doute.
Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Citrix 1Y0-A28. Pass4Test a une expérience riche pour répondre les demandes des candidats.
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Citrix 1Y0-A28 très tôt. Pass4Test peut vous permettre à réussir 100% le test Citrix 1Y0-A28, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
Le test Citrix 1Y0-A28 est l'un très improtant dans tous les tests de Certification Citrix, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Code d'Examen: 1Y0-A28
Nom d'Examen: Citrix (Implementing NetScaler 10 for Networking and Traffic Optimization)
Questions et réponses: 123 Q&As
Le test Certificat Citrix 1Y0-A28 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Citrix 1Y0-A28. Vous allez prendre toutes essences du test Citrix 1Y0-A28 dans une courte terme.
Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Citrix 1Y0-A28 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Citrix 1Y0-A28 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Citrix 1Y0-A28.
1Y0-A28 Démo gratuit à télécharger: http://www.pass4test.fr/1Y0-A28.html
NO.1 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D
Citrix examen certification 1Y0-A28 certification 1Y0-A28 1Y0-A28
NO.2 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B
Citrix examen 1Y0-A28 1Y0-A28 certification 1Y0-A28
NO.3 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B
Citrix examen 1Y0-A28 1Y0-A28 1Y0-A28
NO.4 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C
Citrix 1Y0-A28 examen 1Y0-A28 1Y0-A28 examen
NO.5 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B
Citrix examen 1Y0-A28 1Y0-A28 examen 1Y0-A28 examen
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A
Citrix 1Y0-A28 examen 1Y0-A28 1Y0-A28 certification 1Y0-A28
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B
Citrix examen certification 1Y0-A28 1Y0-A28
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C
Citrix examen 1Y0-A28 1Y0-A28 certification 1Y0-A28
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C
certification Citrix 1Y0-A28 examen certification 1Y0-A28 1Y0-A28
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B
Citrix certification 1Y0-A28 1Y0-A28 1Y0-A28 1Y0-A28 examen
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C
Citrix 1Y0-A28 examen 1Y0-A28
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B
Citrix examen certification 1Y0-A28 1Y0-A28 1Y0-A28 certification 1Y0-A28
Dans cette Industrie IT intense, le succès de test Citrix 1Y0-A28 peut augmenter le salaire. Les gens d'obtenir le Certificat Citrix 1Y0-A28 peuvent gagner beaucoup plus que les gens sans Certificat Citrix 1Y0-A28. Le problème est comment on peut réussir le test plus facile?
没有评论:
发表评论