Le test simulation SCO 090-077 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test SCO 090-077 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test SCO 090-077. Votre argent sera tout rendu si vous échouez le test.
Obtenez la Q&A de test SCO 090-077 de Pass4Test plus tôt, vous pouvez réussir le test Certification SCO 090-077 plus tôt.
Code d'Examen: 090-077
Nom d'Examen: SCO (UNIXWARE 7 ACE RECERTIFICATION V10A1)
Questions et réponses: 58 Q&As
Le test de Certification SCO 090-077 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.
Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test SCO 090-077 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.
Pass4Test est un site à offrir particulièrement la Q&A SCO 090-077, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification SCO 090-077, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test SCO 090-077 et même se renforcer vos connaissances professionnelles IT.
Le test SCO 090-077 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.
090-077 Démo gratuit à télécharger: http://www.pass4test.fr/090-077.html
NO.1 In which file can you add or change default boot parameters?
A. /stand/bfs.blm
B. /stand/boot
C. /stand/smallfs.blm
D. /stand/stage3.blm
Answer: B
SCO 090-077 examen 090-077 certification 090-077
NO.2 Which command line creates a character special device file with a major number=19 and a minor
number=1?
A. mknod /dev/devicename c 19 1
B. mknod /dev/devicename c 1 19
C. mkdev /dev/devicename c 19 1
D. mkdev /dev/devicename c 1 19
Answer: A
SCO 090-077 examen 090-077 examen
NO.3 Every UnixWare 7 system with TCP/IP has a network routing table within the kernel. Which field is NOT
contained in a routing table entry?
A. Netmask
B. Broadcast Address
C. Destination IP address
D. Network interface
Answer: B
SCO examen 090-077 certification 090-077 090-077
NO.4 Which file controls the re-use of a user ID?
A. /etc/skel/ageduid
B. /etc/default/idage
C. /etc/security/ia/ageduid
D. There is not a file that controls the re-use of a user ID. After a user is deleted it is not possible to re-use
an ID.
Answer: C
SCO certification 090-077 090-077 examen 090-077 certification 090-077
NO.5 How many hard disk slices are created by default?
A. 16
B. 32
C. 64
D. 128
Answer: A
SCO 090-077 090-077 examen
NO.6 Which command do you use to create a set of emergency floppy diskettes?
A. diskadd (1M)
B. disksetup (1M)
C. emergency_disk (1M)
D. emergency_rec (1M)
Answer: C
SCO certification 090-077 090-077
NO.7 Which command can you use to display the attributes of any disk device?
A. devattr (1M)
B. displaypkg (1M)
C. diskcfg (1M)
D. dodisk (1M)
Answer: A
SCO 090-077 certification 090-077 090-077 examen
NO.8 Which serial communications ports does UnixWare 7 recognize by default ?
A. COM 1 only
B. COM 2 only
C. COM1 and COM2
D. COM1, COM2, COM3, and COM4
Answer: D
SCO 090-077 certification 090-077 090-077 090-077 examen
NO.9 Which of the following actions occur when you choose se default disk operations?during the installation
of UnixWare 7?
A. A new boot sector installs, the disk is NOT scanned for bad blocks, and the disk geometry is NOT
configured.
B. A new boot sector installs, the disk is scanned for bad blocks, and the disk geometry is configured.
C. A new boot sector installs, the disk is scanned for bad blocks, and the disk geometry is NOT
configured.
D. A new boot sector installs, the disk is NOT scanned for bad blocks, and the disk geometry is
configured.
Answer: A
certification SCO 090-077 examen 090-077
NO.10 Which three port monitors are provided on UnixWare 7 systems?
A. init (1M), liload (1M), and ttyadm (1M)
B. init (1M), liload (1M), and ttymap (1M)
C. init (1M), llistat (1M), and ttyadm (1M)
D. inetd (1Mtcp), listen (1M), and ttymon (1M)
Answer: D
SCO 090-077 090-077 examen 090-077 090-077 examen
NO.11 When running the fdisk (1M) command and selecting se whole disk for UNIX, which statement is true?
A. Any existing partitions are destroyed and the UNIX partition is marked active.
B. Any existing partitions are destroyed and you must manually activate the partition.
C. Any existing partitions are NOT destroyed and the UNIX partition is marked active.
D. Any existing partitions are NOT destroyed and you must manually activate the partition.
Answer: A
certification SCO 090-077 090-077 090-077 090-077 examen 090-077
NO.12 Which of the following can you NOT use the Boot Command Processor (BCP) to accomplish?
A. Display or change default boot parameters
B. Enter single-user state
C. Load another UNIX kernel
D. Start the print service
Answer: D
SCO 090-077 090-077
NO.13 Which answer describes the correct order in which diskadd (1M) invokes commands to configure
additional disks?
A. fdisk (1M), mkfs (1M0, and disksetup (1M)
B. disksetup (1M), fdisk (1M), and mkfs (1M)
C. fdisk (1M), disksetup (1M), and mkfs (1M)
D. None of the above.
Answer: C
SCO examen 090-077 090-077 examen
NO.14 Which two serial device files support software flow control?
A. /dev/term/00m and /dev/term/00h
B. /dev/term/00m and /dev/term/00s
C. /dev/term/00m and /dev/term/00t
D. /dev/term/00s and /dev/term/00t
Answer: D
SCO examen certification 090-077 090-077 090-077
NO.15 How many detected hard disks can you create partitions and filesystems on during the installation of
the UnixWare 7 operating system?
A. Eight (8)
B. Six (6)
C. Four (4)
D. Two (2)
Answer: D
SCO certification 090-077 090-077
NO.16 Which command can you use to check the accuracy of installed files and compare them to the
contents of the /var/sadm/install/contents file?
A. pkgadd (1M)
B. pkgchk (1M)
C. pkginfo (1M)
D. pkgtrans (1M)
Answer: B
SCO 090-077 certification 090-077
NO.17 If it exists, in which hard disk slice is the PDINFO (Physical Disk Information) stored?
A. The boot slice
B. The dump slice
C. The var slice
D. The volume management public slice
Answer: C
SCO 090-077 examen certification 090-077 090-077 examen
NO.18 Which statement is false?
A. The vxfs filesystem supports the creation of 2 terabyte file sizes by default.
B. The vxfs filesytem supports the creation of up to 2 gigabyte file sizes by default.
C. The vxfs filesystem supports a 4 kilobyte logical block size.
D. The vxfs filesystem supports an 8 kilobyte logical block size.
Answer: A
SCO examen 090-077 examen certification 090-077 090-077 examen 090-077
NO.19 How many partitions can you define on the first hard disk during the installation of the UnixWare 7
operating system?
A. One (1)
B. Two (2)
C. Three (3)
D. Four (4)
Answer: D
certification SCO certification 090-077 090-077 090-077 examen 090-077 090-077
NO.20 What is the maximum vxfs (VERITAS) filesystem size?
A. 2 terabytes
B. 1 terabyte
C. 2 gigabytes
D. 1 gigabyte
Answer: B
SCO certification 090-077 090-077 090-077 examen 090-077
Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A SCO 090-077 comme votre guide d'étude.
没有评论:
发表评论