Est-ce que vous vous souciez encore pour passer le test Microsoft 070-693? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Microsoft 070-693, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Microsoft 070-693. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.
C'est sûr que le Certificat Microsoft 70-411 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Microsoft 70-411, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Microsoft 70-411 peut bien tester la professionnalité de IT.
Le programme de formation Microsoft 070-693 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Code d'Examen: 070-693
Nom d'Examen: Microsoft (Windows Server 2008R2, Virtualization Administrator)
Questions et réponses: 140 Q&As
Code d'Examen: 70-411
Nom d'Examen: Microsoft (Administering Windows Server 2012)
Questions et réponses: 196 Q&As
Un bon choix de l'outil à se former est le point essentiel à passer le test Microsoft 070-693, et les documentations à propos de rechercher le test Microsoft 070-693 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.
70-411 Démo gratuit à télécharger: http://www.pass4test.fr/70-411.html
NO.1 Your network contains an Active Directory domain named contoso.com. The domain contains
two servers named Admin1 and Server2. Both servers run Windows Server 2012. Both servers have
the File and Storage Services server role, the DFS Namespaces role service, and the DFS Replication
role service installed. Admin1 and Server2 are part of a Distributed File System (DFS) Replication
group named Group1. Admin1 and Server2 are separated by a low-speed WAN connection. You
need to limit the amount of bandwidth that DFS can use to replicate between Admin1 and Server2.
What should you modify?
A. The cache duration of the namespace
B. The staging quota of the replicated folder
C. The referral ordering of the namespace
D. The schedule of the replication group
Answer: D
certification Microsoft 70-411 examen 70-411 examen certification 70-411
NO.2 Your network contains an Active Directory domain named contoso.com. The domain contains
a server named Admin1 that runs Windows Server 2012. Admin1 has the File Server Resource
Manager role service installed. You configure a quota threshold as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that a user named User1 receives an email notification when the threshold is
exceeded. What should you do?
A. Configure the File Server Resource Manager Options.
B. Modify the members of the Performance Log Users group.
C. Create a performance counter alert.
D. Create a classification rule.
Answer: A
certification Microsoft 70-411 examen certification 70-411 70-411
NO.3 Your network contains an Active Directory domain named contoso.com. The functional level of
the forest is Windows Server 2008 R2. Computer accounts for the marketing department are in an
organizational unit (OU) named Departments\Marketing\Computers. User accounts for the
marketing department are in an OU named Departments\Marketing\Users. All of the marketing
user accounts are members of a global security group named MarketingUsers. All of the marketing
computer accounts are members of a global security group named MarketingComputers. In the
domain, you have Group Policy objects (GPOs) as shown in the exhibit. (Click the Exhibit button.)
You create two Password Settings objects named PSO1 and PSO2. PSO1 is applied to MarketingUsers.
PSO2 is applied to MarketingComputers. The minimum password length is defined for each policy as
shown in the following table.
You need to identify the minimum password length required for each marketing user. What should
you identify?
A. 5
B. 6
C. 7
D. 10
E. 12
Answer: D
Microsoft 70-411 examen 70-411 examen
NO.4 Your network contains an Active Directory domain named contoso.com. The domain contains
a domain controller named DC1 that runs Windows Server 2012. You have a Group Policy object
(GPO) named GPO1 that contains several custom Administrative templates. You need to filter the
GPO to display only settings that will be removed from the registry when the GPO falls out of scope.
The solution must only display settings that are either enabled or disabled and that have a comment.
How should you configure the filter? To answer, select the appropriate options below. Select three.
A. Set Managed to: Yes
B. Set Managed to: No
C. Set Managed to: Any
D. Set Configured to: Yes
E. Set Configured to: No
F. Set Configured to: Any
G. Set Commented to: Yes
H. Set Commented to: No
I. Set Commented to: Any
Answer: AFG
Microsoft examen 70-411 70-411 examen certification 70-411
Explanation/Reference:
A: Set Managed to: Yes There are two kinds of Administrative Template policy settings: Managed
and Unmanaged. The Group Policy Client service governs Managed policy settings and removes a
policy setting when it is no longer within scope of the user or computer.
F: Set Configured tO: Any We want to display both settings that are enable and disabled.
G: Set Commented to: Yes Only settings that are commented should be displayed. Note: Filter with
Property Filters The Local Group Policy Editor allows you to change the criteria for displaying
Administrative Template policy settings. By default, the editor displays all policy settings, including
unmanaged policy settings. However, you can use property filters to change how the Local Group
Policy Editor displays Administrative Template policy settings. There are three inclusive property
filters that you can use to filter Administrative Templates. These property filters include:
*Managed
*Configured
*Commented
NO.5 HOTSPOT
Your network contains an Active Directory domain named contoso.com. All servers run Windows
Server 2012. The domain contains an organizational unit (OU) named FileServers_OU.
FileServers_OU contains the computer accounts for all of the file servers in the domain. You need to
audit the users who successfully access shares on the file servers. Which audit category should you
configure? To answer, select the appropriate category in the answer area.
Answer:
NO.6 You have a server named Admin1 that runs Windows Server 2012. Admin1 has the File Server
Resource Manager role service installed. Admin1 has a folder named Folder1 that is used by the
human resources department. You need to ensure that an email notification is sent immediately to
the human resources manager when a user copies an audio file or a video file to Folder1. What
should you configure on Admin1?
A. A file screen
B. A file screen exception
C. A file group
D. A storage report task
Answer: A
Microsoft examen 70-411 examen 70-411
NO.7 Your network contains an Active Directory domain named contoso.com. The domain contains
five servers. The servers are configured as shown in the following table.
All desktop computers in contoso.com run Windows 8 and are configured to use BitLocker Drive
Encryption (BitLocker) on all local disk drives. You need to deploy the Network Unlock feature. The
solution must minimize the number of features and server roles installed on the network. To which
server should you deploy the feature?
A. Server3
B. Server5
C. Server1
D. Server2
E. Server4
Answer: B
certification Microsoft 70-411 70-411 examen certification 70-411 certification 70-411
NO.8 Your network contains an Active Directory domain named contoso.com. The domain contains
a file server named Admin1 that runs Windows Server 2012. You view the effective policy settings
of Admin1 as shown in the exhibit. (Click the Exhibit button.)
On Admin1, you have a folder named C:\Share1 that is shared as Share1. Share1 contains
confidential data. A group named Group1 has full control of the content in Share1. You need to
ensure that an entry is added to the event log whenever a member of Group1 deletes a file in
Share1. What should you configure?
A. The Audit File System setting of Servers GPO
B. The Sharing settings of C:\Share1
C. The Security settings of C:\Share1
D. The Audit File Share setting of Servers GPO
Answer: C
Microsoft 70-411 certification 70-411
没有评论:
发表评论