Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Microsoft après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Microsoft 74-697. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Les produits de Pass4Test sont préparés pour le test Certification Microsoft 74-338, y compris les formations et les informations ciblées au test Microsoft 74-338. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
Code d'Examen: 74-338
Nom d'Examen: Microsoft (Lync 2013 Depth Support Engineer Exam)
Questions et réponses: 114 Q&As
Code d'Examen: 74-697
Nom d'Examen: Microsoft (OEM Preinstallation)
Questions et réponses: 98 Q&As
Pass4Test peut offrir nombreux de documentations aux candidats de test Microsoft 74-338, et aider les candidats à réussir le test. Les marétiaux visés au test Microsoft 74-338 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Microsoft 74-338 100%.
Il y a plusieurs de façons pour réussir le test Microsoft 74-697, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.
Certification Microsoft 74-697 est un des tests plus importants dans le système de Certification Microsoft. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test Microsoft 74-697 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.
74-338 Démo gratuit à télécharger: http://www.pass4test.fr/74-338.html
NO.1 You administer a Microsoft Lync Server 2010 Standard Edition server in your network
environment.
You deploy a Microsoft Lync Server 2013 Standard Edition server.
You want to migrate users from Lync Server 2010 to Lync Server 2013. You migrate a test account
from Lync Server 2010 to Lync Server 2013.
You start the Lync 2013 client on one of your test computers and start testing various modalities.
During testing, you decide to test the Meet Now functionality in Lync 2013 client. Meet Now starts a
conference and fails to connect.
You start Clslogging.exe. You generate a log that includes the following information:
You need to identify the cause of the issue. What should you do first?
A. Open another log file from the Lync client in Snooper.
B. Right-click the error message and select Go to nearest entry in trace viewer.
C. Start WireShark and perform the Meet Now test again.
D. Click Show Call Flow Window.
Answer: B
Microsoft examen 74-338 examen certification 74-338
NO.2 You support a Microsoft Lync Server 2013 Enterprise pool named Lync2013.contoso.local.
The pool is configured
with two Session Initiation Protocol (SIP) domains named litware.com and fabrikam.com. The
environment also includes the following:
-three Front End Servers named Lync2013FEl, Lync 2013FE2, and Lync2013FE3 -one Back End Server
named Lync2013BE You plan to install a single Edge Server. You create an Edge pool named
Lync2013Edge.contoso.local. You want to configure the following Edge services:
-Access Edge to use sip.fabrikam.com
-Web Conferencing to use conf.fabrikam.com You also want to enable the federated access feature.
You need to assign internal and external certificates to the Lync 2013 Edge server. Which two
actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Request a private certificate from an internal certificate authority (CA) and include the name
Lync2013Edge.contoso.local. Assign the certificate to internal interface of the Edge Server.
B. Request a wildcard certificate for *.contoso.local from an internal certificate authority (CA).
Assign the certificate to internal and external interfaces of the Edge Server.
C. Request a certificate from a public certificate authority (CA) and include the names
sip.fabrikam.com, sip.litware.com, and conf.fabrikam.com. Assign this certificate to the external
interface of the Edge Server.
D. Request a certificate from a public certificate authority (CA) and include the names
Lyncdiscoverexternal.fabrikam.com and sipfederation.fabrikam.com. Assign the certificate to
internal and external interfaces of the Edge Server.
E. Request a certificate from a public certificate authority (CA) and include the names
sip.fabrikam.com and sip.litware.com. Assign this certificate to the internal interface of Edge Server.
Answer: A,C
Microsoft certification 74-338 certification 74-338 74-338 examen 74-338
Explanation:
Lync Server 2013 uses certificates to provide communications
encryption and server identity authentication. In some cases, such as web publishing through the
reverse proxy, strong subject alternative name (SAN) entry matching to the fully qualified domain
name (FQDN) of the server presenting the service is not required. In these cases, you can use
certificates with wildcard SAN entries (commonly known as "wildcard certificates") to reduce the
cost of a certificate requested from a
public certification authority and to reduce the complexity of the planning process for certificates.
NO.3 You plan to deploy a Microsoft Lync Server 2013 Enterprise server by using a
side-by-side upgrade from Office Communication Server (OCS) 2007 R2.
You perform the following actions:
-Complete the schema updates, forest update, and domain update.
-Define and connect the Lync Server 2013 topology to OCS 2007 R2 by using topology builder.
-Deploy Front End Pool, Director Pool, Persistent Chat Pool, and Edge Pool.
The Lync Server 2013 environment is using the OCS 2007 R2 Mediation Server
and associated PSTN gateway for PSTN inbound and outbound calls.
You want to test the Lync Server 2013 server for inbound, outbound, and dial-in
conference calls from a test computer that is located in a customer's office. Your
access to the customer network is restricted to Lync Severs, OCS servers, and some
test computers. During inbound, outbound, and dial-in conference calls, you encounter problems
with media.
The calls have significant jitter and packet loss. Calls are intermittently disconnecting.
You need to determine the cause of these problems. What should you do?
A. Run the ClsController.exe command and select the Incomingand OutgoingCalls scenario on the
Front End Server.
B. Run a protocol analyzer on the Public Switched Telephone Network (PSTN) gateway.
C. Run NetMonitor on the Edge Server.
D. Run NetMonitor on the Mediation Server.
Answer: D
certification Microsoft certification 74-338 certification 74-338
NO.4 You are a member of the CsAdministrator group that supports the Microsoft Lync datacenter
for the Contoso company. The datacenter consists of one pool that is running Lync 2013. Contoso
has a second Active Directory Domain Services (AD DS) site with a domain controller. The Lync
server pool fails. You need to recover the Central Management Store (CMS) and users. Which three
actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Run the Invoke-CsPoolFailover cmdlet.
B. Run the New-CsRegistrarConfiguration cmdlet.
C. Run the Install-CsDatabase and Move-CsManagementServer cmdlets.
D. Run the Move-CsDatabase and Set-CsManagementServer cmdlets.
E. Create a Backup pool.
Answer: A,C,E
Microsoft examen 74-338 examen certification 74-338 74-338 examen 74-338 examen
Explanation:
A: Invoke-CsPoolFailover
Invokes the failover process for a Lync Server 2013 pool. Failover refers to the process that occurs
when a pool fails and the current users of that pool are then
signed on to a backup pool. The pool failover process provides a way for administrators to quickly
restore service to users if the Registrar pool they have
logged on to should suddenly become unavailable. If a pool fails, users will automatically be signed
off from Lync Server 2013; if they immediately try to log
back on, they will be redirected to their specified backup pool. C:
* The Move-CsManagementServer cmdlet enables administrators to move the Central Management
Server (and the accompanying Central Management store) from one pool to another. Because there
is always the potential for data loss, not to mention service interruption, any time you move the
Central Management Server, it is recommended that you do not make such a transfer unless:
1.You need to decommission the existing management pool, and must transfer the Central
Management Server before doing so.
2.You've encountered a disaster recovery scenario in which the existing Central Management Server
is no longer accessible.
Before you move the Central Management Server, you must do the following:
*1. Verify that you have created the new Central Management store.
This is done by running the Install-CsDatabase cmdlet and using the CentralManagementDatabase
parameter.
NO.5 You support a Microsoft Lync Server 2013 Enterprise pool deployed in a high availability
configuration for Back End Servers named Backend 1 and Backend2. You execute the
Get-CSDatabaseMirrorState cmdlet and discover the following errors.
You need to resolve the connectivity issue and bring up the mirror databases to the synchronized
state between the Back End Servers. What should you do?
A. From the mirror Back End Server, create the inbound rule on the firewall.
B. From the Front End Server, create the inbound rule on the firewall.
C. Run the Test-CsDatabase cmdlet.
D. Run the Invoke-CsPoolFailOver cmdlet.
Answer: C
Microsoft 74-338 certification 74-338 74-338 examen 74-338 74-338 examen
NO.6 You are a member of the CsAdministrator group that supports the Microsoft Lync 2013
datacenter for the Contoso company. The Contoso datacenter has 65,000 users. The datacenter has
two pools, named ConPool01 and ConPool02. Both pools run Microsoft Lync Server 2013. The
Central Management Store is hosted on ConPool01. The servers that run ConPool01 suffer a
catastrophic failure. You want users hosted on ConPool01 to be supported permanently on
ConPool02. You need to fail over ConPool01. What should you do?
A. Run the Set-CsConfigurationStoreLocation cmdlet.
B. Run the Install-CsDatabase PowerShell cmdlet, and then the Move- CsManagementServer cmdlet.
C. Run the Invoke-CsPoolFailover PowerShell cmdlet.
D. Run the Get-CsDatabaseMirrorState cmdlet, and then the Invoke-CSManagementServerFailover
PowerShell cmdlet.
Answer: D
Microsoft examen 74-338 74-338 examen certification 74-338
NO.7 You are a member of the CsAdministrator group that supports the Lync datacenter for your
company. The datacenter consists of one pool that is running Microsoft Lync Server 2013. You
deploy SQL Mirroring. The principal server fails and you are unable to perform a manual failover for
more than an hour. Users are placed into resiliency mode. You need to ensure that failover occurs
automatically and without administrator intervention. What should you do?
A. Configure a backup registrar.
B. Configure SQL Mirroring with a witness.
C. Deploy a Survivable Branch Server (SBS).
D. Deploy a Survivable Branch Appliance (SBA).
Answer: B
Microsoft examen 74-338 examen 74-338 examen
NO.8 You support a customer whose network environment includes Microsoft Lync 2013 deployed
in a datacenter that has two pools, named PoolA and PoolB. Both PoolA and PoolB have Microsoft
Lync Server 2013 installed. You use the Lync Management Shell for all administrative actions.
You run the Invoke-CsPoolFailover PowerShell cmdlet and you receive the following message:
Invoke-CsPoolFailOver: This Front-end pool "poolA.contoso.com" is specified in topology as the next
hop for the Edge server. Failing over this pool may cause External access/Federation/Split-
domain/XMPP features to stop working. Please use Topology Builder to change the Edge internal
next hop setting to point to a different Front-end pool, before you proceed. You need to fail over
PoolA only. What should you do?
A. Run the Get-CsDatabaseMirrorState cmdlet, and then run the
Invoke-CSManagementServerFailover PowerShell cmdlet.
B. Run the Set-CsAccessEdgeConfiguration cmdlet.
C. Run the Set-CsEdgeServer PowerShell cmdlet.
D. Run the Set- CsAVEdgeConfiguration cmdlet
Answer: C
Microsoft examen 74-338 examen certification 74-338 74-338
没有评论:
发表评论